Utilities — Water & Refrigeration

Raw water, DM, RO, pyrogen-free water, cooling towers, chilled water, brine and refrigeration. Our engineering covers the full water envelope — from raw water characterization to WFI-grade systems — plus chilled water and brine refrigeration design.

Capabilities Operating Experience Engagement Shapes

Capabilities

Each capability is named, scoped and tied to a deliverable.

Raw Water Treatment & Pre-Treatment

Direct

Sand filtration, activated carbon, softener and dechlorination, with raw water characterization and pre-treatment system design.

Deliverable received

OutputRaw water characterization and pre-treatment system design.

DM Water Plant Design

Direct

Two-bed (SAC + SBA) vs. mixed-bed demineralization, with regeneration system design and quality assurance plan.

Deliverable received

OutputDM water plant design with regeneration and quality assurance plan.

RO Plant Design

Direct

Reverse Osmosis water plants with membrane selection, recovery ratio optimization, cleaning protocol, and single-pass vs. double-pass RO for different water quality targets.

Deliverable received

OutputRO plant design with membrane selection and recovery optimization.

Pyrogen-Free Water (WFI-Grade) Systems

Direct

Distillation (multi-effect, vapour compression) vs. ultra-filtration, storage and distribution loop design (hot vs. cold loops) and sanitization protocols.

Deliverable received

OutputWFI-grade water system with distribution loop and sanitization design.

Cooling Tower Selection & Sizing

Direct

Induced draft vs. forced draft, FRP vs. concrete, sizing for plant heat rejection load, approach and range optimization, and make-up water and blowdown management.

Deliverable received

OutputCooling tower selection and sizing with make-up and blowdown management.

Cooling Tower Water Management

Direct

Operating cooling tower performance optimization, scale and biofilm control, chemical treatment programme and drift loss reduction.

Deliverable received

OutputCooling tower optimization with chemical treatment programme.

Chiller & Refrigeration System Selection

Direct

Vapour compression vs. absorption chillers, refrigerant selection (R134a, R410a, ammonia, glycol) and sizing for process cooling loads.

Deliverable received

OutputChiller and refrigeration selection sized to the cooling load.

Process Water Reuse & Recycle

Direct

Water reuse opportunity identification, cascade reuse design, treatment requirements for reuse streams and ZLD-supporting engineering.

Deliverable received

OutputWater reuse and recycle design with treatment requirements.

Operating Experience

CHB/CHW air systems, WTP/ETP/DM/RO and pyrogen-free (WFI-grade) water systems direct operating experience. Cooling tower and refrigeration system engineering across multiple commercial plants. Water reuse and recycle engineering for plants pursuing ZLD compliance.

Typical Engagement Shapes

Recommended entry